Use one array to manage step sequence

rotating-display-controller/rotating-display-controller.ino

@@ -1,4 +1,5 @@
 // --- Hardware Configuration ---
+// Pins connected to the ULN2003 driver (or similar stepper driver)
 #define IN1 9
 #define IN2 10
 #define IN3 11
@@ -6,21 +7,13 @@
 
 // Step sequences for 28BYJ-48
 // Clockwise sequence
-int stepSequenceCW[4][4] = {
+int stepSequence[4][4] = {
   { 1, 0, 0, 0 },
   { 0, 1, 0, 0 },
   { 0, 0, 1, 0 },
   { 0, 0, 0, 1 }
 };
 
-// Counter-Clockwise sequence (reverse of CW)
-int stepSequenceCCW[4][4] = {
-  { 0, 0, 0, 1 },
-  { 0, 0, 1, 0 },
-  { 0, 1, 0, 0 },
-  { 1, 0, 0, 0 }
-};
-
 // --- Configuration Constants ---
 const int STEPS_PER_REVOLUTION = 2048; // 28BYJ-48 standard (512 steps * 4 gear reduction)
 const float DEGREES_PER_STEP = 360.0 / STEPS_PER_REVOLUTION;
@@ -66,15 +59,15 @@ void updateStepInterval() {
 }
 
 void calculateStepsForAngle(float angle) {
-  // Determine direction
+  // Determine direction based on angle sign
   if (angle >= 0) {
-    _directionCW = true;
+    _directionCW = true; // Clockwise
   } else {
-    _directionCW = false;
-    angle = -angle; // Work with absolute value
+    _directionCW = false; // Counter-Clockwise
+    angle = -angle; // Work with absolute value for calculation
   }
   
-  // Calculate steps
+  // Calculate total steps needed
   _stepCount = (int)(angle / DEGREES_PER_STEP);
   
   // Update speed interval immediately
@@ -84,26 +77,30 @@ void calculateStepsForAngle(float angle) {
   _currState = MOVE;
   _stepsRemaining = _stepCount;
   _stepTime = millis();
-  _currentStepIndex = 0;
+  _currentStepIndex = 0; // Start from the beginning of the sequence
   
   // Reset wait timer just in case
   _waitTime = 0;
 }
 
 void runStep() {
-  int* sequence = _directionCW ? stepSequenceCW[0] : stepSequenceCCW[0]; // Placeholder logic
-
-  // Actually, we need to access the 2D array correctly
-  int (*seq)[4] = _directionCW ? stepSequenceCW : stepSequenceCCW;
+  // Get the current step pattern from the single array
+  const int* step = stepSequence[_currentStepIndex];
   
-  setStep(seq[_currentStepIndex][0], 
-          seq[_currentStepIndex][1], 
-          seq[_currentStepIndex][2], 
-          seq[_currentStepIndex][3]);
-          
-  _currentStepIndex++;
-  if (_currentStepIndex >= 4) {
-    _currentStepIndex = 0;
+  // Set the output pins
+  setStep(step[0], step[1], step[2], step[3]);
+  
+  // Update index based on direction
+  if (_directionCW) {
+    _currentStepIndex++;
+    if (_currentStepIndex >= 4) {
+      _currentStepIndex = 0; // Wrap around to start
+    }
+  } else {
+    _currentStepIndex--;
+    if (_currentStepIndex < 0) {
+      _currentStepIndex = 3; // Wrap around to end for CCW
+    }
   }
 }